Gallery

Bestückung Hochtemperatur Vakuumofen mit Tiegeln für den Silizierungsprozess

PCCB 410 mm Porsche 991 GT2 RS – Customer-Disc Oktober 24

PCCB 420 mm Panamera with delaminations received Sept.24

PCCB 420 mm Panamera with delaminations after repair Sept 24

processing center Bayreuth

Resurfaced AMG rear 360mm carbon ceramic disc

Processing Center Bayreuth

Service Center Oberpfaffenhofen/Bavaria nearby Munich

Service Center Oberpfaffenhofen/Bavaria nearby Munich. here is the incoming goods department, where brake discs are dismantled, checked and fitted.

This is where the thermal processes take place. Silicon has a melting point of 1560°C, one “burn” takes around 20 hours with heating up, maintaining the temperature and cooling down. The high-temperature vacuum iveb can be heated up to 2,500°C. The silicon in our slurry melts and becomes thinner than water and the slurry forms…

This consists of an internal and an external cooler and is necessary for the thermal control of the oven system

Here, the prepared brake discs are coated and the slurry mixture is prepared. Each type of brake disk requires specific preparation.